Contents:

Realtek PCIe GBE Family Controller Not Working Overview:

Sometimes, you can find there is no network or Realtek PCIe GBE Family Controller keeps disconnecting on Windows 10. The time you check it in device manager, just to find a yellow exclamation after expanding Network adapters tree. And sometimes, device manager tells you network adapter code error 31 or error code 12.

Or for some users, it is also common to that you are experiencing Realtek PCIe GBE Family Controller driver or hardware-related problems. Anyway, you need to fix this Realtek network driver issue on Windows 10 immediately.

What is the Realtek PCIe GBE Family Controller?

It is a controller chipset by Realtek for connecting computer’s CPU PCI Express (PCIe) bus to GBE (Giga Band Ethernet). What’s more, it also allows your computer to plug into a wired internet, thus your PC runs with the internet.

On a simple note, Realtek PCIe GBE Family Controller driver works for the LAN hardware that is embedded into your PC motherboard.

Applies to: Windows 10 Pro released in July 2015 Windows 8 Windows 8 Enterprise Windows 8 Pro Windows 8.1 Windows 8.1 Enterprise Windows 8.1 Pro Windows 7 Enterprise Windows 7 Home Basic Windows 7 Home Premium Windows 7 Professional Windows 7 Starter Windows 7 Ultimate Windows Server 2008 Datacenter Windows Server 2008 Datacenter without Hyper-V Windows Server 2008 Enterprise Windows Server. Code error 28 is a device manager error code that mainly happens to video card, sound card or USB devices. This error can also occur on a 32-bit or 64-bit version of Windows 7/8/10 on an Ethernet Controller or Bluetooth. My network adaptor driver is the Realtex PCIe GBE Family Controller. My laptop is only a few months old and came with Windows 10 Home installed. It was successfully updated to the Fall Creator editor over a month ago and I had no problems with the Ethernet connection until recently. It is the 64-bit version of Windows 10. Macbook pro early 2011 bootcamp was not willing to let the SSD run in AHCI mode in windows 10, so I did EFI installation of windows 10. Everything seems to work but the audio card. This device cannot start. (Code 10) in the High definition.

Related: Download Killer E2200 Gigabyte Ethernet Controller Drivers on Windows 10

How to Fix the Realtek PCIe GBE Family Controller Issue?

Now you can try to fix this Ethernet bug with the following methods. It mainly includes network hardware and driver issues causing the network not working on Windows 10.

It is either the driver error or old or broken LAN card that causes Realtek PCIe GBE Family Controller issue to pop up.

Solutions:

Solution 1: Update Realtek PCIe GBE Family Controller Driver

First off, so long as you noticed that Realtek PCIe GBE Family Controller is not working or disconnects from network connection on Windows 10, you may as well update the network driver to the latest version.

Network Controller Driver Windows 10 Code 28 64

Only when your network drivers are updated to Windows 10 can your PC get onto the internet.

It is a thing of course that you are able to update the Realtek PCIe GBE Family Controller on the computer official website or the Realtek network interface.

But sometimes, it is extremely difficult to find out the exact Realtek network Controller driver for your PC on your own.

Therefore, you can use the professional and safe Windows 10 driver downloader and updater —- Driver Booster. Apart from updating the Realtek PCIe driver for you, Driver Booster will also fix network failure if you need it to do so.

1. Download, install and run Driver Booster on Windows 10.

2. Hit Scan. Driver Booster will search for your PC for the outdated or corrupted drivers for you.

3. In the searching result, find out Network adapters and then hit Update to get the Realtek network driver updated by Driver Booster.

Tips: Utilize Driver Booster to fix network failure on Windows 10.

After Driver Booster scanned for your PC, try to hit the Tools on the left pane and then choose to Fix Network Failure by it.

At this moment, Driver Booster would have helped you download the latest Realtek PCIe GBE Family Controller on Windows 10.

And the Ethernet issue with driver will have been correctly solved, either. If likely, it is also available to update Wacom drivers using Driver Booster.

Solution 2: Uninstall and Reinstall the Realtek PCIe GBE Family Controller

It has been reported that most of the Realtek network Controller not working problems can be attributed to the corrupted or incompatible Realtek network Controller drivers on Windows 10.

In this way, you are supposed to uninstall this problematic driver and then reinstall it automatically via Windows 10.

1. Open Device Manager.

Video Controller Driver Windows 10

2. Expand Network adapters and then right click the Realtek PCIe GBE Family Controller to Uninstalldevice. Confirm to Uninstall.

3. On the top of Device Manager interface, click Action and then select Scan for hardware changes.

Windows 10 device manager will scan for the changes you have made. And then it will also reinstall the uninstalled Realtek PCIe GBE Family Controller driver for you automatically.

For some users, once you have finished reinstalling the Realtek Controller driver in device manager, you can see the Ethernet comes up on Windows 10. The problem Realtek network Controller not working has disappeared from your PC.

Related: Windows Has Detected an IP Address Conflict on Windows 10

Solution 3: Change Network Controller Settings

It is useful to change some values in Realtek PCIe GBE Family Controller Properties on Windows 10. So when Realtek PCIe Controller is experiencing driver or hardware problems, you can configure the settings for it to see if it works to bring back the Ethernet network.

1. In Device Manager, expand Network adapters and then right click the Realtek Controller driver to open its Properties.

2. In Properties window, under the Advanced tab, locate Property, and find out Auto disable Gigabit and then choose to set it Re-link, battery or AC.

3. Also under Property, locate Green Ethernet to set it Disabled. Hit OK to save changes.

After that, you can check if the Realtek Controller issue remains on Windows 10.

Solution 4: Restore Windows 10

If the above-mentioned solutions failed to fix this network adapter not working issue, perhaps the culprit lies in the system. You have to create a system point where Realtek PCIe GBE Family Controller driver will work on Windows 10.

Solution 5: Replace a Realtek Network Adapter or Use Wireless Adapter

Even if restoring Windows 10 is unable to fix this issue, it implies that the Realtel LAN card on the motherboard is dead. So you have to replace a new one.

But replacing a Realtek network adapter requires proficiency in computer. In this way, you might as well connect to network using a wireless adapter if possible. Just connect your wireless adapter to the USB port on Windows 10.

2. Windows 10 will install the driver for the wireless adapter, but in some conditions, it cannot be installed automatically. So you can view the tutorial from here: how to update wireless drivers on Windows 10.

3. Now you can connect computer to network. And the Realtek PCIe GBE Family Controller issue will disappear soon.

Above all, you can fix Realtek PCIe GBE Family Controller not working on Windows 10 from the perspective of hardware and driver. And if the solutions above are useless for you, maybe you have to get a new PCIe network adapter for your computer.

Code error 28 is a device manager error code, it mainly occurs to sound card, video card or USB devices, but it may also happen to Ethernet Controller or Bluetooth on Windows 7/8/10 either 32 or 64 bit. Once it appeared on your PC, you will find that the Video Controller, Realtek HD audio, USB device or many other devices in device manager show that the drivers for this device are not installed.

To make matter worse, it is possible that your computer occasionally freezes for a short time, or that Windows 10 responds to the mouse or keyboard slowly. All of these will enormously affect your computer use.

What is more, code error 28 is virtually a driver issue which can be seen for the error message above, for most cases, it may be due to the missing, corrupted or the outdated drivers, so on the basis of all the facts about this device manager error, this tutorial will focus on telling you how to fix the code 28 error in terms of device driver issues which result in the drivers for this device are not installed.

Solutions:

Solution 1: Uninstall and Reinstall the Device Driver

As it can conclude from the code error 28 massage: The drivers for this device are not installed, it is easy to know to figure out that error, you can at the very beginning try to uninstall and reinstall the device driver.

Here choose to uninstall Base system device for a reference.

1: Enter Device Manager.

2: Navigate to Other Devices and right click it to expand it.

3: Under Other Devices, locate Base system device and right click it to Uninstall it.

Then you can see that Windows 10 will search for your computer for the latest Base System Device driver for you.

4: Restart the computer. It is for the purpose of making Windows 10 reinstall the online drivers for you.

But in most cases, you will find that Windows 10 cannot help you find the compatible or latest Base System Device or any other device driver, so under this circumstance, you can go to the official site to search for the right device driver, thus fixing the code error 28: the drivers for the device are not installed.

Solution 2: Update the Device Driver

As it is mentioned above, the code 28 error is a driver issue, therefore, in a large sense, you can try to download or update such problematic device drivers as VGA Controller, Realtek HD audio, or USB devices drivers for Windows 10.

To fix the code 28 error in the quickest way, you are advised to download or update the device driver via Driver Booster.

Driver Booster is a safe and professional driver downloading and updating tool, with the help of it, you can update the Video Controller or Realtek HD audio drivers in several minutes within three clicks. In this way, Driver Booster is also a perfect tool to fix the code 28 error.

Firstly, Download, install and run Driver Booster on your computer.

Network Controller Driver Windows 7

1: Scan. As long as you click it, Driver Booster will automatically scan your PC for the missing or outdated or corrupted drivers, so it can find out the Base system device driver is having a driver issue.

Network Controller Driver Windows 10 Code 28 Serial

2: Update or Update Now. Find the outdated driver or missing drivers, click Update button or Update Now button to download and update the driver.

Then you will it very easy to fix code 28 error that the drivers for the device are not installed issue by updating the device drivers, such as Base system device drivers.

In a word, as one of the device manager code errors, the code error 28 might have hung over you for a long time, in this way, it will be very wise of you to refer to this tutorial for the detailed and efficient solutions to fix this code 28 error: The drivers for this device are not installed.

Related Articles: