NanoVNA V2 Hardware versions

AutoCal V2 & AutoCal HD: Download the V8 software. FlashScan V1: Download the V7.5 software. Check for Updates functions are activate for customers updating from public release to public release software. Customers updating from Release Candidate or Beta software must download public release software manually. Customers wanting to update to. Adding firmware update logic to a vendor-supplied driver. The existing function driver can implement the firmware update mechanism, as shown in the following diagram: Alternatively, if you want to update the function driver and the firmware update driver separately, create a second device node, on which you will install the firmware update driver. Make sure that your installed linux distro wich has kernel 2.6.12 or newer version! 2: Update your smartreader+ if it has v1.2 or older firmware with v1.3 3: Before update make sure your reader is 100% reconized by linux! You will find inside that 'smartreaderv103.zip' very precise how to update that device. When you update the firmware to Ver. 3.2, the camera's settings (except the date and time) are reset and menus will be displayed in English following the update. INCLUDED IN FIRMWARE VERSION 3.0. New AF algorithm from the OM-D E-M1X is included on the OM-D E-M1 Mark II.

This page lists all NanoVNA V2 (S-A-A-2) versions and firmware downloads.

The Smargo Smartcard Reader Plus is a USB smartcard reader / programmer based on a powerful ARM core processor. The Smargo SmartReader Plus incorporates an integrated USB to Serial converter, which enables the Smargo SmartReader Plus to work with all standard Phoenix compatible Linux® and Microsoft Windows® applications.

Hardware versions / Firmware downloads

• You can identify which NanoVNA V2 variant you have using the table below. Select CONFIG > VERSION in the menu on your device. This will show an about screen with the device name on top which you can look up in the table below.
• Ensure the correct firmware variant for your hardware version is used, otherwise your device may fail to boot.
• Only the following 3 hardware versions are official, but some unofficial versions (listed below) also have firmware support.

Unofficial hardware variants

For SYSJOINT's NanoVNA-F V2, see http://www.sysjoint.com/en/content/?144.html

For BH5HNU's 3GHz NanoVNA-F development, see https://groups.io/g/nanovna-f

Smargo V2 Firmware Update 7.50

The following are the unofficial (clone) hardware versions that are tested to be compatible with the NanoVNA V2 firmware.

While we allow producing and selling the V2.2 design without royalties, clones from vendors that participate in unfair competition practices such as dumping will not get support from us and are not listed on this page.

How to update firmware

Smargo V2 Firmware Update Windows 10

1. Switch off the NanoVNA V2 main unit.
2. Hold down the JOG LEFT button (leftmost of the 3 pushbuttons) and switch on the NanoVNA.
3. Once white screen appears, release JOG LEFT.
4. Select the device in NanoVNA-QT
5. You will be prompted to flash a firmware binary, which you can download from the table above.